Garage Door Restoration & Door Repair
Garage door restoration brings damaged timber, frames and glass back to a high standard for far less than the cost of a new unit. MCR Repairs carry out garage door restoration and professional door repair across the North West, working on faded paint, cracked glass, warped timber and worn entrance doors.
Your front door and garage door say a lot about your property before anyone steps inside, and a damaged one undermines that first impression fast. Most homeowners assume it means a costly replacement. That's rarely the case.
This work sits within our wider window and door repair service. If your garage door or entrance door needs attention, book a survey and find out what restoration can achieve.
Send us a message.
Why repair before replacing?

A new garage door or entrance door is a high cost, and it isn't always necessary.
Repair usually costs a fraction of full replacement. It also takes far less time, since there's no waiting on manufacturing, delivery or fitting slots.
Restoration preserves the door you already have, including any original character that a modern replacement wouldn't match. This matters most with timber garage doors, which usually have a style and grain that are difficult to source again.
Repairing a door in place also avoids the disruption of removing the old unit and fitting a new one. Your garage or entrance stays usable throughout.
Restore your garage door before replacing it. Get a free assessment and see what's possible first.

Types of doors we repair
We repair a wide range of doors, both around the home and in commercial settings. Whether it's a single scratch or damage across the whole panel, we assess it properly before recommending any work.
- Timber garage doors, including up-and-over and side-hinged styles
- Wooden entrance doors, from period originals to modern designs
- Composite doors, repairing scratches, chips and impact damage
- UPVC doors and frames, repairing cracks, discolouration and hardware damage
- Internal doors, restoring scuffed or damaged surfaces
- External doors, protected against ongoing weather exposure
- Glazed doors, with cracked or damaged glass panels
- Side garage doors, usually overlooked until damage becomes obvious
Whatever door you're dealing with, we assess it individually before recommending a repair approach.

Garage door restoration
Common problems include fading from UV exposure, scratches from vehicles or tools, and dents from impact. The finish loses its original colour and shine.
Garage door restoration addresses all of this. We repair the surface, restore colour where it's faded, and refinish the door to look close to its original condition.
Restoration extends the working life of a garage door significantly. Many doors written off as beyond saving still have sound structure underneath the damaged surface.
Where a garage door needs a complete colour change rather than a surface repair, our domestic spraying and respraying service can refinish the whole door on-site.
A better-looking door starts with MCR Repairs. Book a garage door assessment before you plan for a replacement.
Wooden garage door restoration
Timber garage doors need a different approach to composite or metal doors, since wood responds differently to weather and repair.
Wooden garage door restoration involves treating any rot or damaged sections, then repairing splits and cracks. We refinish the surface to protect it going forward.
Timber is particularly prone to weather damage if the protective finish has worn away. Left untreated, this can lead to swelling, cracking or rot in the wood itself.
Catching this early keeps the repair straightforward. A door assessed and treated before serious rot sets in is far easier to restore than one left for years.
Specialist knowledge of timber matters here. Wood needs the right preparation and finish to protect it properly, not just a quick coat of paint. For period doors and high-value timber, our wood and laminate repairs team can also restore panelling and surrounding woodwork to match.


UPVC and composite door repair
Not every damaged door is timber. UPVC and composite doors are common, and they bring their own repair challenges.
UPVC doors and frames can crack, discolour or fade with sun exposure, particularly on south-facing entrances. Handles, hinges and letterboxes also loosen or wear with daily use.
Composite doors are tougher than UPVC, but they still chip and scratch, especially around the edges and handle area. Impact damage from keys, bags or deliveries is common.
We repair both materials in place, restoring colour and finish without replacing the door or frame. Where a UPVC surface has faded badly, our dedicated UPVC restoration service brings the colour and finish back closer to new.
This matters for cost as much as appearance. A new composite door with fitting can run into hundreds of pounds, while a repair addresses the same damage for a fraction of that.
Door frame repairs
Door frames take constant contact, from shopping bags, tools, pets and everyday knocks, and the damage adds up over time.
We repair impact damage, cracks and cosmetic wear on door frames. Wherever possible, we preserve the original structure and appearance.
Frame damage usually looks worse than it is. A cracked or chipped section can be repaired and refinished, rather than requiring a full frame replacement.
If you're searching for garage door frame repair, our technicians assess frame damage on site, whether it's timber, UPVC or composite. Ask about frame repair before assuming a full replacement is needed.


Repairing damaged door glass
Cracked or damaged glass in a door panel is a common problem. This affects older entrance doors and glazed internal doors alike.
In many cases, we can repair door glass rather than replace the whole panel. We address chips, cracks and surface damage directly, and our glass repairs service covers more extensive glazing damage where needed.
This matters for both appearance and safety. Damaged glass left unaddressed can worsen over time, and repair restores the panel's look and integrity.
Where the glass itself needs replacing, we can still restore the surrounding frame and finish. The whole door then looks consistent once complete.
Avoiding common mistakes before repair
A few habits can make door and garage door damage worse before a technician arrives.
- Avoid painting over cracked or split timber without treating the underlying damage first. This can trap moisture and speed up rot.
- Don't force a sticking or misaligned garage door repeatedly, since this can strain the frame, hinges or mechanism further.
- If glass is cracked, avoid cleaning it with heavy pressure or hot water. Sudden temperature changes can cause a crack to spread.
If in doubt, it's worth having the damage assessed before attempting a DIY fix. A quick call usually saves a bigger repair bill later.
Speak with our repair specialists before the damage gets worse.
Caring for your door after repair
A little care after a repair helps the finish last much longer.
- Wash timber and composite doors with mild soapy water rather than harsh chemicals, which can strip the protective finish over time. A soft cloth or sponge is usually enough to keep the surface clean.
- Check hinges, handles and locking mechanisms every few months. Small amounts of lubrication keep moving parts working smoothly and reduce strain on the frame.
- Repaint or reseal timber doors before the existing finish fully wears away, rather than after. Catching this early protects the underlying wood and avoids the need for a larger repair later.
- Keep an eye on the seal around garage doors and entrance frames. A worn seal lets in draughts and moisture, which can undo the benefit of a recent repair.
- For UPVC and composite doors, avoid abrasive cleaners on the surface. These can dull the finish and make future colour matching harder if a repair is ever needed.
A little regular care goes a long way. Doors and garage doors that are looked after between repairs tend to need far less work overall.
Awarded Sustainable product of the year 2020 And best hard surfaces restoration & repair service 2022
Our repair process
We follow a clear, methodical process for every door and garage door repair.
Inspection - We examine the damage, either from photos or on site.
Assessment - We confirm whether repair or restoration is the right approach.
Preparation - We clean and prepare the surface, treating any rot or damage.
Repair - We fill, rebuild or refinish the damaged area.
Colour matching - We match the finish to your existing door by hand.
Finishing - We blend and seal the repair for a lasting result.
Final inspection - We check the completed work before we leave.
Most door repairs are completed in a single visit, with minimal disruption to your home or business.
Why homeowners choose MCR Repairs

Homeowners, landlords and property managers choose MCR Repairs for careful, honest door and garage door repair.
- Skilled technicians experienced in timber, composite, UPVC and glazed doors
- Careful colour matching for a consistent, natural finish
- Friendly, clear communication from quote to completion
- Practical advice, including when replacement is truly the better option
- Reliable workmanship carried out with attention to detail
We carry out door and garage door repair across Manchester, Liverpool and the wider North West. Wherever your property is in the region, it's worth asking what's possible before committing to a replacement.
Protect your property's first impression
A damaged garage door or entrance door doesn't have to mean a costly replacement.
We offer honest advice and skilled door and garage door restoration, with no pressure towards work you don't need.
Contact us for a free, no-obligation quote today.
Testimonials
Send us a message.




